how to install cork floors

When considering flooring, one rarely considers using the underdog of materials, cork. Cork flooring has often been relegated to use in offices and light factories, and has generally been viewed as a design ‘no-no’ in the home.

It is cheap, easy to install, versatile and looks good. Cork enjoyed a stint of residential prominence in the 70’s despite being around for over a century, but then died down. It seems that the various applications for design, as well as its durability and cost effectiveness, are helping cork flooring make a bit of a comeback in recent times.

More and more home builders, designers and architects are considering and even using cork floors in ever increasing manners, and seem to have no regrets in doing so.

The primary positive comes in the form of just how easy the installation process is. Usually, when you want something that looks this good, it’s expensive and requires arduous labor. However, the rise of the floating cork tile has seen an end to that dilemma, and now anybody can enjoy beautiful flooring which they’ve installed themselves.

With the increase in technology, the detriments of many materials have to a large extent been overcome. Cork is one of these materials which has benefited and the reasons for not using cork are slowly but surely being abrogated by disuse.

If not treated properly though, cork can be damaged by the smallest objects – from thorns caught on ones shoes to toast crumbs which have fallen on the floor. This will obviously alter the look of your flooring over time, but can be avoided with proper treatment.

Deciding on Cork Flooring

Cork, despite its definite properties, is versatile in terms of look and can be shifted any which way.

One cannot be blamed for looking at a cork floor and suspecting that it is something else such as wood or laminate because dying cork is relatively simple and cheap.

For these reasons, cork flooring is gaining in popularity especially among those who appreciate good look and design. The versatility lends itself to a wide range of applications in a number of settings.

Unfortunately, one cannot go on looks alone and so despite the looks being versatile, there is more that most require from flooring than merely look and it is therefore important to consider more features of cork flooring.

Because cork is generally recycled and sustainable, the resource isn’t scarce. Taking a key from simply supply and demand economics, this means that cork is one of the most affordable flooring options available.

One pays for what they get though so while the entry levels of cork flooring should certainly be cheaper than their alternative material counterparts, once one begins considering design, prices can inflate significantly.

Of course all materials become more expensive with improved design so cork is not unique in that regard. It may well just be that the competitive price for value begins to dissipate as one pursues higher density cork and different designs.

Whatever the situation, skimping on your flooring is not something one should do so when shopping for your cork flooring, be certain to check aspects such as density, thickness, and quality of the material before gunning for the cheapest floor you can find.

Back to Top

Which Cork Flooring to Use

Cork flooring can come in many forms but the most common would be in glue down tiles and floating floors.

Floating floors are slightly thicker and provide higher resilience. It looks like false laminate wood except it is real wood because it is essentially the bark off of the tree.

Cork flooring extends its versatility to its installation also. It is therefore easier to install cork flooring as the tiles can either be glued down or clicked together in the same way one would do with laminate tiles.

We prefer floating floors as the increased resilience of the glue down tiles in marginal and the floating floors are significantly easier to install.

Back to Top

How to Install: 4 Steps

  1. Pre-installation & Planning
  2. Accommodate Temperature Changes
  3. Installation Process
  4. Maintenance

1. Pre-installation and Planning

No good handy work comes without planning. The better the planning, the better the end product, so invest in some graph paper and plan your design and flooring accordingly. Other items you’ll require are:

  • Rubber mallet
  • Rubber spacers
  • Tape Measure
  • Tapping Block
  • A saw/tile cutter
  • Adhesive (in the case of using the adhesive tiles which remain our second choice)

Once you have your plan and equipment, it’s important that you smooth out and dry the surface that you will be applying the cork flooring to. Next, lay out the tiles for easy access.

Take caution that if your house is relatively old, asbestos may have been used in your flooring. This should be checked out before you begin preparing your floors.

Back to Top

2. Accommodating Temperature Changes

Because cork expands and contracts as the temperature changes, you’ll need to make allowance for some extra space around the walls. 1 centimeter should be ample.

Place rubber spacers along the wall to allow for humidity, temperature and environmental changes once the flooring is installed.

Back to Top

3. Installing the Tiles

Regardless of the type of tiles you purchase, you should begin installing them lengthwise along a wall you’ve selected.

Floating floors lock together so if you’re using them, place the tongue of the next tile into the grove of the previous one.

Place the tapping block over the tile you’ve just inserted to protect it then use the mallet to tap the block into place. Continue doing this down the same direction as you began maintaining the space between the wall and a firm attachment of all the tiles.

If you are using glue down tiles, follow the same procedure as above only using the proper adhesive to secure the tiles in place. Remember to ensure spacing between the tiles and the wall and limit pockets of air between the tiles themselves.

In either instance, you will come to a point where there is an obstruction or another wall. In this instance, use the tape measure to determine the length of tile to complete the row and cut one of the tiles accordingly.

To avoid visible marks, mark the measurement on the underside of the tile. Be certain to be as accurate as possible as an inaccurate job makes for shoddy workmanship.

Back to Top

4. Maintenance

Cork is incredibly resilient until you penetrate it deeply. Think of is as your own skin; a bruise can heal (in the corks case, it the sponge qualities press it back into place) but a deep enough scratch is likely to leave a mark. Without proper maintenance, the flooring can easily be seriously damaged with negligible ease.

An excellent idea to overcome this deficiency of cork flooring is to place felt pads or small carpets under heavier pieces of furniture whether wheeled or not.

It’s also a great idea to place breathable mats, drainage saucers or anything to avoid long term exposure to moisture near anything related to water, be it pot plants or a sink. The reason for this would be to avoid discoloration of your cork floors in instances where water gets trapped or settles.

Sunlight also has damaging properties and while this is certainly a far more long term issue than water damage, one may want to consider taking steps to avoid exposure to direct sunlight which may lead to discoloration.

Cork is often also treated with sealant which will wear off over time. It is important to reapply sealant every so often.  Polyurethane lasts a home some 5 to 10 years while waxes are less durable and last only up to 2 years.

Back to Top

What We Think

Floating floors are the easiest to install. They require no adhesive and usually come with a protective layer underneath that should protect against the elements.

Given the choice, we’d opt for cork flooring but given the further choice we’d opt for a floating floor before going to adhesive tiles.

There seems to be no discernible detriment when picking the one over the other, so why not opt for the easiest and cleanest to install?

One can complete an entire room on a Saturday and have their friends over to marvel at their hard work that same evening.

If you are able to harness your puzzle building skills from your three year old self, when puzzles where nothing complex, you’d have no trouble installing these floors yourself.

Cheap, easy to install, versatile and really good looking, it is no wonder why more people are turning to DIY cork flooring. You now have the option of avoiding expensive tillers invading your home and doing a fun, relatively simple, relatively quick project on your own and for your own benefit.

The old days of looking down on cork flooring are behind us and as more people are becoming amenable to placing this underrated substance in their homes, it’s becoming more and more common to find cork flooring. There is a reason for this; with the convince, versatility and cost-effectiveness cork flooring offers, one would be remiss not to at least consider it and all things considered, one would probably end up using it.

Houzz.com has a number of splendid ideas and concepts for use of cork flooring.

Have you installed cork flooring? Let us know your experiences.

Back to Top

Resources

Leave a Reply

Your email address will not be published. Required fields are marked *